Evaporation Technology
Natural Circulation Evaporator
Quick start-up and large specific capacity. Vertical shell-and-tube heat exchanger of short tube length with lateral separator arranged at the top.
The Natural Circulation Evaporators offer the possibility to be used as a high concentrator.
Well suited for working with products insensitive to high temperatures that require large evaporation ratios as well as with products with a high tendency to foul or with Non-Newtonian products, where the apparent viscosity may be reduced by the high velocities.
Often assembled with a divided boiling chamber and top-mounted separator as well.
Particular features:
- Quick start-up and large specific capacity.
The liquid content of the evaporator is very low due to the relatively short length and small diameter of the heating tubes.
Working Principle
Working Principle of Natural Circulation Evaporator
The liquid is fed to the bottom of the heating tubes. Due to the external heating of the tubes the liquid film on the inside walls of the tubes starts to boil and evaporates partially.
As a result of the upward movement of the vapors produced, the liquid is also transported upwards – according to the thermosiphon or rising film principle. After the separation from the vapors it flows back into the evaporator through a circulation pipe, ensuring stable and uniform circulation.
The larger the temperature difference between the heating chamber and the boiling chamber, the greater the intensity of evaporation and, consequently, the liquid circulation and heat transfer rates.
Where the boiling chamber of the circulation evaporator is divided into several separate chambers, each one equipped with its own liquid circulation system, the heating surface required for high final concentrations can be considerably reduced compared to an undivided system.
The final concentration is only reached in the last chamber. In other chambers, the heat transfer is considerably higher due to the lower viscosities and boiling point elevations.
Heating options for thermal separation plants
Related Products
Falling Film Evaporator
Best suited for temperature-sensitive products and liquids with small amounts of solids and going up to high concentrations
Multi-Flash Evaporators
For applications involving large throughputs of process solution with a relatively low concentration factor and other applications.
CompaCon® Evaporators
Skid mounted Falling Film and Forced Circulation Evaporators for small-scale production. Energy efficient, easy to transport and assemble.
Evaporation Test Facilities at Karlsruhe R&D Center
Test facilities available for laboratory and pilot plant testing for different kinds of evaporator systems.
GEA Insights
Bringing centrifuges up to speed with sustainability
Every drop and every kilowatt hour count when it comes to centrifuge development.
GEA has been building centrifuges for over 130 years – something you wouldn’t think is in question every day. Jürgen Mackel, Vice President...
GEA’s solar journey: powering a sustainable future
Through investments in renewable energy, GEA is lowering its CO2 emissions around the world.
Decarbonizing processes with industrial heat pumps
When it comes to improving the health of the planet, GEA takes a leading role. As one of our sustainability-focused strategic objectives, we are forging a path to help our customers across myriad industries to reduce energy use...
