GEA separators are designed for liquid-based applications. Using centrifugal force, they are used for separating suspensions consisting of two or more phases of different densities, i.e. they can be used for liquid-liquid separation, for liquid-liquid-solid separation or for liquid-solid separation. They are equally as effective at separating liquid mixtures at the same time as removing solids.
The fields of application range from separating processes in the chemical and pharmaceutical industries through oil and fat recovery to the production of dairy products, beer, wine, fruit and vegetable juices, as well as the processing of mineral oil and mineral oil products.
Separators have disk or annular chamber bowls. They operate continuously in respect of the discharge of the liquid phases. In respect of solids discharge they work either discontinuously (e.g. discontinuous disk-type centrifuges which must be stopped so that the collected solids can be removed by hand), semi-continuously (self-desludging disk type centrifuges = self-cleaning separators) or fully continuously (nozzle-type separators).
GEA separators are available with different types of drives: gear drive, belt drive, direct drive and integrated direct drive. The later is the next genuine stage in evolution in the separator construction process and works without motor shaft, gear, belts, coupling and motor bearing. The smaller number of installed components not only reduce the energy losses – they also reduce the maintenance costs, thus enhancing the availability of the machine. The space requirement of the integrated direct drive is approximately one third lower than is the case with equivalent gear or flat belt machines.
GEA separators with integrated direct drive can also be used in a very flexible manner. The bowl speed is infinitely variable within a specific range without change in transmission ratio. In addition, the maintenance process itself has been very much simplified. For instance, it is possible for the spindle to be taken out of the bearing housing only by loosening the bolts. The innovative design of the integrated direct drive also enables the motor to be replaced complete with the drive within only a few hours when maintenance work has to be carried out – this is time which is very valuable and which can be used productively elsewhere.
Showing 4 of 57
GEA clarifier hycon are a two room concept designed for a sterile process in clean rooms while achieving highest concentrations of solids in aseptic processes. According to model, low-temperature applications are available.
GEA clarifiers for pharma extraction are used in solid-liquid extraction processes with low solid contents (up to approx. 7 % by vol.).
GEA clarifier for pilot scales are the reliable solution to set up new processes. They offer two key advantages: maximum scale-up reliability with minimal installation work input as well as optimum process safety for every process with only low capital expenditure. Fully equipped with the renowned GEA technology features, they are the best techni...
Bacteria removal separators from GEA efficiently remove bacteria and spores from the raw and vat milk and whey.
The innovative process diagnostic and consultant service.
GEA Marine Bowl Service offers clearly defined service levels with fixed pricing and bundles service expertise in a dedicated competence center.
Designed to regulate different separator processes automatically, the GEA marine Upgrade Kit comprises additional software and a sophisticated easy-to-install hardware kit. Adding considerably to the functionality of our marine separators, it makes them more efficient and environmentally friendly.
Corrective repairs for your GEA separators and decanters
Is a FAT (Factory Acceptance Test) of your centrifuge not possible on site due to current travel restrictions, a very tight schedule or other urgent reasons? Are you generally looking for ways to make business processes more digital and to sustainably reduce costs and time?
Here, too, we are at your side with the professional quality you are accu...
"Pushing the limits" with the new GEA marine Separator
GEA EngySpeed – for resource-saving milk skimming
Every drop and every kilowatt hour count when it comes to centrifuge development.
GEA has been building centrifuges for over 130 years – something you wouldn’t think is in question every day. Jürgen Mackel, Vice President...
Through investments in renewable energy, GEA is lowering its CO2 emissions around the world.
The story of the GEA centrifuge begins in 1893, when Franz Ramesohl and Franz Schmidt began production of their patented mechanical milk separator, paving the way for modern dairy processing. The innovation helped overcome a...