Industrial fluids
Certain surface treatment processes in the metal-processing industry require thorough cleaning with washing liquids beforehand. To maintain the optimum cleaning effect and ensure continuity of production, entrained particles and tramp oils must be separated out early. GEA separators can handle this job.
In the running production process, GEA separator separate oil and solid particles in a single step. The system convinces through its constantly high cleaning efficiency and substantially reduced washing lye consumption. The life of the cleaning liquid is extended, wear to the machine tools is reduced and the quality of the machined work pieces is enhanced.
One branch in which this cleaning process plays an important role is the automotive supplier industry. Deep drawing presses operating with pressing weights of up to 2000 tons are used for the production of car body parts. Local temperatures of up to 2000 °C can occur as a result of the level of pressure and friction between the tool and the work piece. For this reason, so-called drawing oil is sprayed into those areas in which the largest deformations take place. This reduces the level of wear and tear on the expensive tools, and also increases the dimensional accuracy of the components. Before further processing, the components have to be degreased in a series of immersion baths. Tramp oil and metal particles must be continuously removed from the washing lye to prevent renewed grease contamination.
Separators from GEA are applied in the treatment of the lye-drawing oil mixture. They ensure that the circulating washing lye always remains clean. At the same time, concentrated drawing oil is recovered in the separating process which is recycled back into the drawing process after being enriched with additives. This means lower disposal costs for the supplier since the oil-free wash water does not have to be declared as special oil and can therefore be disposed of more cheaply.
Showing 4 of 4
GEA separators are designed for liquid-based applications. Using centrifugal force, they are used for separating suspensions consisting of two or more phases of different densities, i.e. they can be used for liquid-liquid separation, for liquid-liquid-solid separation or for liquid-solid separation. They are equally as effective at separating liq...
Jet pumps, also referred to as ejectors, are devices for the conveyance, compression or mixing of gases, vapors, liquids or solids and for the production of vacuum in which a gaseous or liquid medium serves as the motive force.
Mixing is a vital process in the production of a diverse range of products in a wide range of industries. Based on our extensive experience and technological know-how, GEA offers a variety of batch, continuous and in-house custom designed mixing solutions for unique applications that meet specific customer needs.
The separating centrifugal separator is a machine in which two liquids of different densities are separated from each other. Solids may also be separated at the same time.
Every drop and every kilowatt hour count when it comes to centrifuge development.
GEA has been building centrifuges for over 130 years – something you wouldn’t think is in question every day. Jürgen Mackel, Vice President...
Through investments in renewable energy, GEA is lowering its CO2 emissions around the world.
When it comes to improving the health of the planet, GEA takes a leading role. As one of our sustainability-focused strategic objectives, we are forging a path to help our customers across myriad industries to reduce energy use...